POE80U-560G 80w Ethernet POE injector

THIS PART IS NOW DISCONTINUED. NEW PART IS POE90U-560-R which can be ordered HERE

POE80U-560G Phihong 80W Phihong Power Over Ethernet Gigabit High Power Single Port Injector.

Detection the same as IEEE802.3af except 12.5kohm detection resistor value required at Powered device. Diagnostic LEDs for connect, fault and on.
Single-port Power-over-Ethernet Midspan Injectors inject power into ethernet cables to supply power and data to a PoE enabled devices.
Diagnostic LEDs. Over voltage, over current and short circuit protection. Output voltage protection. Fully regulated output. RJ45 Data In and Data / Power Out sockets. Case fitted with mounting brackets. Harmonic current compliance to EN 61000-3-2. EMI compliance to EN 55022 Class B and FCC Class B. UNH IOL tested. 3-pin IEC320 C14 mains input socket.

• Diagnostic LEDs.
• Over voltage, over current and short circuit protection.
• RJ45 Data In and Data / Power Out sockets.
• Phihong POE80U-560, POE80U-560(G)-R
•  Features:
• Vented Case
• Broken Wire Detect
• Full protection OCP, OVP
• Gigabit CompatibleINPUT
• Voltage rating: 100 to 240VAC
• Voltage range: 90 to 264VAC
• Frequency: 47-63HzOUTPUT
• Total Output Power: 80W
• Efficiency: 65% typical at max load and 120VAC 60HzENVIROMENTAL:
• Operating temperature: -40°C to +55°C
• Dimensions (LxWxH): 203 (8in) x 131 (5.16in) x 63mm (2.48in)
• Weight 2.2kgSTANDARDS
• Safety: cUL / UL, CE, WEEESingle Port Power over Ethernet Midspan