POE31U-1AT 30w AT Gigabit POE injector

Sorry but this part is now Obsolete. It has been replaced with the POE29U-1AT(PL)D part IEC-62368-1 and this part can be found here

POE31U-1AT Phihong 30W Gigabit Power Over Ethernet Injector / Adapter Single Port. This part is intended to replace POE36U-1AT which is now on end of life status. 

Fully compliant detection, disconnect, over load and voltage control IEEE802.3at. Diagnostic LEDs.

This unit is compatable with Cisco Legacy devices, VoIP phones 7910, 7912, 7940, 7960. Wireless Access Points 1040, 1140, 1250, 1260, 3500, POE31W-1AT, POE36U-1AT. Compatible with Aerohive AP230, AP350 and AP390, and AP170 and AP1130 if not mounted outside. Direct replacement for parts POE20U-560G, POE20U-560(G), POE36U-1AT-R. Compatible with WAP’s to 802.11ac spec ie

Cisco Meraki MR18, MR26 and MR34, MA-INJ-4-UK

Non-Vented Case

• Full protection OCP, OVP
• Gigabit Compatible
• 1 year warranty
  Input
• Voltage rating: 100 to 240VAC 0.8A 50-60Hz
• Voltage range: 90 to 264VAC
• Frequency: 47-63Hz
  Output
• Voltage 56vDC 0.535A Pins 3,6 +56vDC, Pins 1,2 Return or -ve.
• Total Output Power: 30W
• Efficiency: 80% typical at max load and 120VAC 60Hz
  Enviromental:
• Operating temperature: 0°C to +40°C
  Dimensions (L x W x H):
• 140 (5.51in) x 65 (2.55in) x 36mm (1.42in)
• Weight 0.2kg (0.44lb)
  Standards
• Safety: cUL/UL, CE, WEEE