DINIC 8 Port Gigabit Switch N-SW-8A

DINIC N-SW-8A 8 Port Gigabit Switch 10/100/1000Mbit

The 8 Port 10/100/1000Mbit switch (N-SW-8A) has been designed for easy installation, high performance and reliability. It delivers maximum speed on all ports, even if the full-duplex mode is fully utilized. Each port has automatic crossover detection, which allows the uplink to another switch without crossover cable. The compact and robust design includes an internal power supply and is ideally suited for SOHO or workplace. Each port can be connected with any kind of network technology, incl. other switches, computers, servers, television, etc. and will be recognized automatically and connect the device.

Features:

• 8 Ports
• MAC address entries 1K / 4 K
• Cache N/A
• Jumbo frames 9 KB
• LED for link, power, 1000M
• Power supply internal 100-240V/AC, 50~60Hz
• Power consumption max. 6 Watt
• Certificates FCC Class B, CE
• Mount by Wall Mount, Mag Mount or Free Standing with pads
• Euro 2 Pin figure 8 cable included.
• Size 183 x 82 x 31 mm
• Weight 0.4kgs
• Operating Temp 0 to 45*C
• Storage Temp -20 to +90*C
• Humidity 10 to 90%
• FCC Class B, CE
• Recommended Cables CAT5E, CAT6, CAT6A
• Filter and Forwarding Rates 1000Mbps port – 1,488,000pps, 100Mbbs 148,800pps, 10Mbps 14,880pps
• Architecture: Store and Forward
• Buffer Memory N/A
• Non Blocking and non head of line blocking full wire speed forwarding
• Store and forward switching method
• Auto negotiation and auto MDI/MDI-X
• Supports Flow control: back pressure for full duplex
• Internal Power Supply
• Magnet, wall or desktop monunting

Standard:

• IEEE 802.3 10BaseT
• IEEE 802u 100BaseTX
• IEEE 802.3ab 1000BaseT
• IEEE 802.3x Flow Control